kdig – Advanced DNS lookup utility

Synopsis

kdig [common-settings] [query [settings]]...

kdig -h

Description

This utility sends one or more DNS queries to a nameserver. Each query can have individual settings, or it can be specified globally via common-settings, which must precede query specification.

Parameters

query

name | -q name | -x address | -G tapfile

common-settings, settings

[query_class] [query_type] [@server]... [options]

name

Is a domain name that is to be looked up.

server

Is a domain name or an IPv4 or IPv6 address of the nameserver to send a query to. An additional port can be specified using address:port ([address]:port for IPv6 address), address@port, or address#port notation. A value which begins with '/' character is considered an absolute UNIX socket path. If no server is specified, the servers from /etc/resolv.conf are used.

If no arguments are provided, kdig sends NS query for the root zone.

Query classes

A query_class can be either a DNS class name (IN, CH) or generic class specification CLASSXXXXX where XXXXX is a corresponding decimal class number. The default query class is IN.

Query types

A query_type can be either a DNS resource record type (A, AAAA, NS, SOA, DNSKEY, ANY, etc.) or one of the following:

TYPEXXXXX

Generic query type specification where XXXXX is a corresponding decimal type number.

AXFR

Full zone transfer request.

IXFR=serial

Incremental zone transfer request for specified SOA serial number (i.e. all zone updates since the specified zone version are to be returned).

NOTIFY=serial

Notify message with a SOA serial hint specified.

NOTIFY

Notify message with a SOA serial hint unspecified.

The default query type is A.

Options

-4

Use the IPv4 protocol only.

-6

Use the IPv6 protocol only.

-b address

Set the source IP address of the query to address. The address must be a valid address for local interface or :: or 0.0.0.0. An optional port can be specified in the same format as the server value.

-c class

An explicit query_class specification. See possible values above.

-d

Enable debug messages.

-h, --help

Print the program help.

-k keyfile

Use the TSIG key stored in a file keyfile to authenticate the request. The file must contain the key in the same format as accepted by the -y option.

-p port

Set the nameserver port number or service name to send a query to. The default port is 53.

-q name

Set the query name. An explicit variant of name specification. If no name is provided, empty question section is set.

-t type

An explicit query_type specification. See possible values above.

-V, --version

Print the program version. The option -VV makes the program print the compile time configuration summary.

-x address

Send a reverse (PTR) query for IPv4 or IPv6 address. The correct name, class and type is set automatically.

-y [alg:]name:key

Use the TSIG key named name to authenticate the request. The alg part specifies the algorithm (the default is hmac-sha256) and key specifies the shared secret encoded in Base64.

-E tapfile

Export a dnstap trace of the query and response messages received to the file tapfile.

-G tapfile

Generate message output from a previously saved dnstap file tapfile.

+[no]multiline

Wrap long records to more lines and improve human readability.

+[no]short

Show record data only.

+[no]generic

Use the generic representation format when printing resource record types and data.

+[no]crypto

Display the DNSSEC keys and signatures values in base64, instead of omitting them.

+[no]aaflag

Set the AA flag.

+[no]tcflag

Set the TC flag.

+[no]rdflag

Set the RD flag.

+[no]recurse

Same as +[no]rdflag

+[no]raflag

Set the RA flag.

+[no]zflag

Set the zero flag bit.

+[no]adflag

Set the AD flag.

+[no]cdflag

Set the CD flag.

+[no]dnssec

Set the DO flag.

+[no]all

Show all packet sections.

+[no]qr

Show the query packet.

+[no]header

Show the packet header.

+[no]comments

Show commented section names.

+[no]opt

Show the EDNS pseudosection.

+[no]opttext

Try to show unknown EDNS options as text.

+[no]optpresent

Show EDNS in presentation format according to the specification in version draft-peltan-edns-presentation-format-01.

+[no]question

Show the question section.

+[no]answer

Show the answer section.

+[no]authority

Show the authority section.

+[no]additional

Show the additional section.

+[no]tsig

Show the TSIG pseudosection.

+[no]stats

Show trailing packet statistics.

+[no]class

Show the DNS class.

+[no]ttl

Show the TTL value.

+[no]tcp

Use the TCP protocol (default is UDP for standard query and TCP for AXFR/IXFR).

+[no]fastopen

Use TCP Fast Open.

+[no]ignore

Don't use TCP automatically if a truncated reply is received.

+[no]keepopen

Keep TCP connection open for the following query if it has the same connection configuration. This applies to +tcp, +tls, and +https operations. The connection is considered in the context of a single kdig call only.

+[no]tls

Use TLS with the Opportunistic privacy profile (RFC 7858#section-4.1).

+[no]tls-ca[=FILE]

Use TLS with a certificate validation. Certification authority certificates are loaded from the specified PEM file (default is system certificate storage if no argument is provided). Can be specified multiple times. If the +tls-hostname option is not provided, the name of the target server (if specified) is used for strict authentication.

+[no]tls-pin=BASE64

Use TLS with the Out-of-Band key-pinned privacy profile (RFC 7858#section-4.2). The PIN must be a Base64 encoded SHA-256 hash of the X.509 SubjectPublicKeyInfo. Can be specified multiple times.

+[no]tls-hostname=STR

Use TLS with a remote server hostname check.

+[no]tls-sni=STR

Use TLS with a Server Name Indication.

+[no]tls-keyfile=FILE

Use TLS with a client keyfile.

+[no]tls-certfile=FILE

Use TLS with a client certfile.

+[no]tls-ocsp-stapling[=H]

Use TLS with a valid stapled OCSP response for the server certificate (%u or specify hours). OCSP responses older than the specified period are considered invalid.

+[no]https[=URL]

Use HTTPS (DNS-over-HTTPS) in wire format (RFC 1035#section-4.2.1). It is also possible to specify URL=[authority][/path] where request will be sent to. Any leading scheme and authority indicator (i.e. //) are ignored. Authority might also be specified as the server (using the parameter @). If path is specified and authority is missing, then the server is used as authority together with the specified path. Library libnghttp2 is required.

+[no]https-get

Use HTTPS with HTTP/GET method instead of the default HTTP/POST method. Library libnghttp2 is required.

+[no]quic

Use QUIC (DNS-over-QUIC).

+[no]nsid

Request the nameserver identifier (NSID).

+[no]bufsize=B

Set EDNS buffer size in bytes (default is 1232 bytes).

+[no]padding[=B]

Use EDNS(0) padding option to pad queries, optionally to a specific size. The default is to pad queries with a sensible amount when using +tls, and not to pad at all when queries are sent without TLS. With no argument (i.e., just +padding) pad every query with a sensible amount regardless of the use of TLS. With +nopadding, never pad.

+[no]alignment[=B]

Align the query to B-byte-block message using the EDNS(0) padding option (default is no or 128 if no argument is specified).

+[no]subnet=SUBN

Set EDNS(0) client subnet SUBN=addr/prefix.

+[no]edns[=N]

Use EDNS version (default is 0). EDNS(0) is enabled by default.

+[no]timeout=T

Set the wait-for-reply interval in seconds (default is 5 seconds). This timeout applies to each query attempt. Zero value or notimeout is interpreted as infinity.

+[no]retry=N

Set the number (>=0) of UDP retries (default is 2). This doesn't apply to AXFR/IXFR.

+[no]expire

Sets the EXPIRE EDNS option.

+[no]cookie[=HEX]

Attach EDNS(0) cookie to the query.

+[no]badcookie

Repeat a query with the correct cookie.

+[no]ednsopt[=CODE[:HEX]]

Send custom EDNS option. The CODE is EDNS option code in decimal, HEX is an optional hex encoded string to use as EDNS option value. This argument can be used multiple times. +noednsopt clears all EDNS options specified by +ednsopt.

+[no]proxy=SRC_ADDR[#SRC_PORT]-DST_ADDR[#DST_PORT]

Add PROXYv2 header with the specified source and destination addresses to the query. The default source port is 0 and destination port 53.

+[no]json

Use JSON for output encoding (RFC 8427).

+noidn

Disable the IDN transformation to ASCII and vice versa. IDN support depends on libidn2 availability during project building! If used in common-settings, all IDN transformations are disabled. If used in the individual query settings, transformation from ASCII is disabled on output for the particular query. Note that IDN transformation does not preserve domain name letter case.

Notes

Options -k and -y can not be used simultaneously.

Dnssec-keygen keyfile format is not supported. Use keymgr(8) instead.

Exit values

Exit status of 0 means successful operation. Any other exit status indicates an error.

Examples

  1. Get A records for example.com:

    $ kdig example.com A

  2. Perform AXFR for zone example.com from the server 192.0.2.1:

    $ kdig example.com -t AXFR @192.0.2.1

  3. Get A records for example.com from 192.0.2.1 and reverse lookup for address 2001:DB8::1 from 192.0.2.2. Both using the TCP protocol:

    $ kdig +tcp example.com -t A @192.0.2.1 -x 2001:DB8::1 @192.0.2.2

  4. Get SOA record for example.com, use TLS, use system certificates, check for specified hostname, check for certificate pin, and print additional debug info:

    $ kdig -d @185.49.141.38 +tls-ca +tls-host=getdnsapi.net \
  +tls-pin=foxZRnIh9gZpWnl+zEiKa0EJ2rdCGroMWm02gaxSc9S= soa example.com

  5. DNS over HTTPS examples (various DoH implementations):

    $ kdig @1.1.1.1 +https example.com.
$ kdig @193.17.47.1 +https=/doh example.com.
$ kdig @8.8.4.4 +https +https-get example.com.
$ kdig @8.8.8.8 +https +tls-hostname=dns.google +fastopen example.com.

  6. More queries share one DoT connection:

    $ kdig @1.1.1.1 +tls +keepopen abc.example.com A mail.example.com AAAA

Files

/etc/resolv.conf

See Also

khost(1), knsupdate(1), keymgr(8).